DRILLING UNIT CASAGRANDE C 11 S

Model: CASAGRANDE C 11 S

Year of manufacture: 1995

Working hours: 18 350 mph

Location: Ukraine, Kiev

Technical data CASAGRANDE C 11 S:

The diesel engine DEUTZ BF 6L 913 / C / T, 104 kW (the engine was replaced with an operating time of 13 070 m / h)
Two-head drilling rig for piles up to 420 mm in diameter. with KDK T 1000 C 6 (1'337 kgm) and KDK T 3000 P 130 (3'000 kgm) for the casing.
Hydraulic clamping and return devices for casing pipes, maximum diameter 420 mm, pressure 50 tons per 1m stroke.
mast 16 m long / Chain drive
Cable winch
Crawler track, width of caterpillars 600mm.
4 hydraulic supports
The total weight is 29'500 kg.
The length and diameter of the pipes, respectively, 12.6 m and 420 mm, the diameter of the augers 360 mm (mounted on the machine, can remain in transit).

Spare parts and consumables are included.

Included:
A set of equipment for the production of piles with a diameter of 420 mm, consisting of pipes 420 mm in diameter, with a wall of 20 mm and a screw coupling 2 x 2.00 m. + 2 x 3.00 m. + Lower pipe with a cutting edge of 2.20 m. + Rotating “plate” m (connected to KDK) with MK. The kit is assembled and mounted on the machine.
Attached:
1 x 7.00 m. + 1 x 1.00 m. + Dish 1.00 m. With MK, complete
1 x 4.40 m with the connection “mama” – “dad”
1 x 3.00 m with the connection “mama” – “dad”
1 x 2.00 m with the connection “mom” – “dad”
2 x 1.00 m with the connection “mother” – “dad”
1 x pipe 8.50 m with VK
1 x pipe 7.10 m without connection
1 x pipe 4.90 m without connection
1 x cutting edge 1.00 m with VK
1 x cutting edge 0.80 m with VK
1 x cutting edge 0.20 m with VK
1 x rotating dish 0.50 m with MK
1 x device for lifting (lowering) drill pipes with MK
4 things. protective cap for thread and pipe cover.
Drilling augers with a diameter of 360 mm. with 6-way clutch SW 120
12.00 m. With the “pilot” + the extension rod is mounted on the machine to this:
6 x 3.00 m with the connection “mama” – “dad”
3 x 1.00 m with the connection “mama” – “dad”
2 x Pilot 0.20 m.
the same is attached:
2 pcs of drill buckets for loose rock, bucket length = 0.40 m.
1 pc drill bucket for loose rock, bucket length = 0.90 m.
1 PC. extension cord 1.80 m, rounded
1 PC. extender multifaceted, double telescopic at 4.30 about 7.45 m. (with bolts inserted)
1 PC. Adapter Trunnion SW 85 with coupling SW 120, 0.25 m
Drilling auger diameter 360 mm with 6-way clutch SW 85
3 x Pilot 2nd cutting with RSM, 0.40 m
1 PC. extension cord 0.55 m, rounded
1 PC. Extender multifaceted, single telescopic with 2.60 approximately. 4.70 m. (With bolts inserted)
1 PC. pipe diameter of 420 mm with HM-tunnel, 1.30 m, without connection.
Including:
Drilling Rig CASAGRANDE Typ T 3000 P100
Drilling Rig CASAGRANDE Typ T 1000 C6